Low-field Nuclear Magnetic Resonance Research Articles

NMR Longitudinal Rotating Frame Relaxation Time (T1ρ) with a Weak Spin Locking Field as an Approach to Characterize Solid-State Active Pharmaceutical Ingredients: Proof of Concept.

Nuclear magnetic resonance (NMR) longitudinal rotating frame relaxation time (T1ρ), rarely used in low-field NMR, can be more effective than conventional T1 and T2 relaxation times to differentiate polymorphic forms of solid pharmaceuticals. This could be attributed to T1ρ sensibility to structural and molecular dynamics that can be enhanced by changing the strength of the oscillating magnetic field (B1) of spinlock pulses. Here, we compared the capacity of T1, T2, and T1ρ to differentiate inactive (A) and active (C) crystalline forms of the World Health Organization essential drug Mebendazole. The results showed that T1 and T2 values of both forms were statistically identical at 0.47 T. Conversely, T1ρ of both forms measured with weak spinlock B1 fields, ranging from 0.08 to 0.80 mT were statistically different in the same spectrometer. The T1ρ also has the limit of detection to detect the presence of at least 10% of inactive A form in the active C form. Therefore, T1ρ, measured with weak spinlock B1 fields can be an effective, streamlined, and complementary approach for characterizing not only solid active pharmaceutical ingredients but other solid-state materials as well.

Performance evolution of alkali-activated phosphorus slag paste filling material: Effect of hemihydrate phosphogypsum content

The stockpiling issues of phosphorus slag (PS) and hemihydrate phosphogypsum (HPG) have become vital technical obstacles limiting the economic development of enterprises. The synergistic substitution of PS and HPG for ordinary Portland cement in preparing alkali-activated phosphorus slag paste filling material (AAPS-PM) is essential to realize the high-value utilization of PS and HPG and reduce carbon emissions. HPG was selected as a sulfate activator for this research due to its metastable qualities and chemical composition benefits. The effect of HPG on the properties of AAPS-PM was systematically investigated by setting time, fluidity, strength development, water resistance, and pore solution pH experiments. The evolution of hydration products and pore size characteristics was elaborated employing X-ray diffractometer (XRD), scanning electron microscopy (SEM) and low-field nuclear magnetic resonance (NMR). The results demonstrated that the addition of HPG displayed remarkable procoagulant thickening characteristics on AAPS-PM. Additionally, HPG was conducive to developing early uniaxial compressive strength (UCS), whereas 90% content of HPG had a negative impact on the enhancement of later UCS. The softening coefficient and water absorption exhibited duality with 80% HPG content as the critical point, obtaining a maximum value of 0.73 and a minimum value of 6.63%, respectively. It is noteworthy that the decrease in pore solution pH was primarily correlated with the acidity carried by HPG. Herein, the alkali activator accelerated the depolymerization of PS vitreous and generated H3SiO4- and H3AlO42- and Al(OH)63-. Furthermore, the active ions combined with Ca2+ and SO42- supplied by HPG, which contributed to the formation of dihydrate gypsum, ettringite and C-(A)-S-H gels. Encouragingly, microscopic analysis confirmed the macroscopic performance changes of AAPS-PM. The gel network created by the interweaving of hydration products refined the pore structure and improved the microstructure morphology, which is the primary source of mechanical strength. Nevertheless, the high content of HPG provided a driving force for the development of capillary pores, resulting in a rapid reduction in later strength. Overall, this research can contribute new ideas to the large-scale integrated disposal of solid waste.

A discussion of the paper “Low-field [formula omitted]H NMR study on geopolymers: The effect of paramagnetic Fe(III)” by Z. Yu, R. de Oliveira-Silva, Y. Pontikes, and D. Sakellariou

The recent paper “Low-field 1H NMR study on geopolymers: The effect of paramagnetic Fe(III)” is discussed. After examining the NMR test method and results, it is deduced that, the relaxation signals of the geopolymers with various Fe(III) contents were inconsistently obtained and interpreted without attention to total intensity. The calibration of surface relaxivity was also questionable. These inappropriate interpretations not only make the experimental results about the effect of Fe(III) loading on spin relaxation unreliable, but also make the discussion about its effect on pore structure of the geopolymers too ambitious, which is further incompatible with current understandings of geopolymerization.

Enzymatic modification lowers syneresis in corn starch gels during freeze–thaw cycles through 1,4-α-glucan branching enzyme

The current research in the food industry regarding enzymatic modification to enhance the freeze–thaw (FT) stability of starch is limited. The present study aimed to investigate the FT stability of normal corn starch (NCS) modified using 1,4-α-glucan branching enzyme (GBE) derived from Geobacillus thermoglucosidans STB02. Comprehensive analyses, including syneresis, scanning electron microscopy, and low-field nuclear magnetic resonance, collectively demonstrated the enhanced FT stability of GBE-modified corn starch (GT-NCS-30) in comparison to its native form. Its syneresis was 66.4 % lower than that of NCS after three FT cycles. Notably, GBE treatment induced changes in the pasting properties and thermal resistance of corn starch, while simultaneously enhancing the mechanical strength of the starch gel. Moreover, X-ray diffractograms and microstructural assessments of freeze–thawed gels indicated that GBE treatment effectively hindered the association of corn starch molecules, particularly amylose retrogradation. The enhanced FT stability of GBE-modified starch can be attributed to alterations in the starch structure induced by GBE. This investigation establishes a foundation for further exploration into the influence of GBE treatment on the FT stability of starch and provides a theoretical basis for further research in this area.

Study on the gelatinization and digestive characteristics of wheat starch and potato starch under low moisture conditions

This study explored the gelatinization and digestive characteristics of wheat and potato starches under low moisture conditions using identical processing parameters. The results revealed that potato starch exhibited greater resistance to digestion than wheat starch, with an enzyme hydrolysis rate 18 % to 30 % lower than wheat starch under the same conditions. The analysis of particle size, swelling power, and low-field NMR demonstrated that potato starch required almost 40 % more moisture for full gelatinization than wheat starch, indicating that low-moisture conditions could not meet the significant water demand of potato starch. Additionally, the DSC analysis showed that potato starch had superior thermal stability, with To of 62.13 °C and ΔH of 16.30 (J/g). Subsequently, the microscopy results showed that the partially gelatinized wheat starch had a rough, porous surface, allowing enzymes for direct access to hydrolysis. In contrast, the potato starch had smoother and less damaged particles without visible pores, enzymes had to degrade it progressively, layer by layer. Furthermore, potato starch still exhibited a lower enzyme hydrolysis rate than wheat starch under the same gelatinization levels. Overall, potato starch is more resistant to hydrolysis and gelatinization in low-moisture environments, making potato starch suitable for low-digestibility products like potato biscuits or chips.

Predicting the compressive strength of tight sandstone based on the low field NMR and pseudo-triaxial compression measurements

The compressive strength is very important for petroleum and other engineering studies. However, the effect of pore size and fluid distribution on the rock’s strength is not fully understood. We developed comprehensive research to study the controlling factors of the compressive strength based on low field nuclear magnetic resonance (NMR) measurements and pseudo-triaxial compression test for tight sandstones. The relationship between the compressive strength and the NMR obtained parameters are investigated completely, aiming for a better estimation of the compressive strength using the NMR data. The result shows that the rock’s strength is strongly controlled by the pore size distribution and the fluid existing state. Generally, the compressive strength is negatively correlated with the average transversal relaxation time, the movable water saturation, and the porosity, but positively correlated with the irreducible water saturation. The result reveals that the rock with larger pore radius and higher percentage of movable fluid is easier to reach the failure state. Further, the precision of the empirical model by multiple regression of the geometric mean of the relaxation time and the porosity is greatly improved compared with the model established by the brittle minerals, which is potentially to be use for geophysical prospecting when the NMR logging data is available.

Mechanism analysis of injection technique of water composition modification for enhanced oil recovery

ABSTRACT By adjusting the composition of injection water, including ionic type and strength, the goal of enhance oil recovery rate can be achieved. However, there is no clear understanding of which factor, ionic type or strength, has a greater impact. In this paper, based on the formation water of the offshore G oilfield, various brines with different ionic strengths and types were prepared. By measuring the zeta potential of rock powder and oil droplets, three-phase contact angle, interfacial tension between oil and water, emulsification properties of brines, and film strength of oil-water interface, the variation rules of the core wettability and emulsification performance of brine were systematically analyzed when the ionic strength and ionic type were changed. The experimental results showed that ionic strength has a greater impact than that of ionic type. For the oil-water-solid (rock) system of the G oilfield, an ionic strength of 82 mM/kg is the threshold for low salinity effect. Reducing ionic strength resulted in an increase in the hydrophilicity of rock and the ability of water flooding to emulsify oil droplets, which contribute to the improvement of oil displacement efficiency. Theoretically, water flooding to enhance oil recovery can be achieved by only reducing the ionic strength. This understanding was verified by dual polarization interferometry (DPI) experiments and low-field nuclear magnetic resonance experiments, which showed that reducing the salinity of the injection water from 42,000 mg/L (ionic strength of 820 mM/kg) to 4200 mg/L (ionic strength of 82 mM/kg) enhanced the oil recovery by 7.9%.

Exploring in-situ combustion effects on reservoir properties of heavy oil carbonate reservoir

Laboratory modeling of in-situ combustion is crucial for understanding the potential success of field trials in thermal enhanced oil recovery and is a vital precursor to scaling the technology for field applications. The high combustion temperatures, reaching up to 480°C, induce significant petrophysical alterations of the rock, an often overlooked aspect in thermal EOR projects. Quantifying these changes is essential for potentially repurposing thermally treated, depleted reservoirs for CO2 storage.In this study, we depart from conventional combustion experiments that use crushed core, opting instead to analyze the thermal effects on reservoir properties of carbonate rocks using consolidated samples. This technique maintains the intrinsic porosity and permeability, revealing combustion's impact on porosity and mineralogical alterations, with a comparative analysis of these properties pre- and post-combustion. We characterize porosity and pore geometry evolution using low-field nuclear magnetic resonance, X-ray micro-computed tomography, and low-temperature nitrogen adsorption. Mineral composition of the rock and grain-pore scale alterations are analyzed by scanning electron microscopy and X-ray diffraction.The analysis shows a significant increase in carbonate rocks’ porosity, pore size and mineral alterations, and a transition from mixed-wet to a strongly water-wet state. Total porosity of rock samples increased in average for 15%–20%, and formation of new pores is registered at the scale of 1–30 μm size. High-temperature exposure results in the calcite and dolomite decomposition, calcite dissolution and formation of new minerals – anhydrite and fluorite. Increased microporosity and the shift to strongly water-wet rock state improve the prospects for capillary and residual CO2 trapping with greater capacity. Consequently, these findings highlight the importance of laboratory in-situ combustion modeling on consolidated rock over tests that use crushed core, and indicate that depleted combustion stimulated reservoirs may prove to be viable candidates for CO2 storage.

Compositional analysis of multilayered plastic constituents and constituent mixtures using benchtop 1H NMR spectroscopy.

Multilayered plastics are widely used in food packaging and other commercial applications due to their tailored functional properties. By layering different polymers, the multilayered composite material can have enhanced mechanical, thermal, and barrier properties compared to a single plastic. However, there is a significant need to recycle these multilayer plastics, but their complex structure offers significant challenges to their successful recycling. Ultimately, the use and recycling of these complex materials requires the ability to characterize the composition and purity as a means of quality control for both production and recycling processes. New advances and availability of low-field benchtop 1H NMR spectrometers have led to increasing interest in its use for characterization of multicomponent polymers and polymer mixtures. Here, we demonstrate the capability of low-field benchtop 1H NMR spectroscopy for characterization of three common polymers associated with multilayered packaging systems (low-density polyethylene [LDPE], ethylene vinyl alcohol [EVOH], and Nylon) as well as their blends. Calibration curves are obtained for determining the unknown composition of EVOH and Nylon in multilayered packaging plastics using both the EVOH hydroxyl peak area and an observed peak shift, both yielding results in good agreement with the prepared sample compositions. Additionally, comparison of results extracted for the same samples characterized by our benchtop spectrometer and a 500-MHz spectrometer found results to be consistent and within 2wt% on average. Overall, low-field benchtop 1H NMR spectroscopy is a reliable and accessible tool for characterization of these polymer systems.

On the synthesis of diphenhydramine: Steady state ki, solvation effects, and in-situ raman and benchtop NMR as PAT

Diphenhydramine is a first-generation antihistamine that is available over-the-counter to treat maladies such as allergic reactions and insomnia. Despite its ubiquity in society and high demand, the kinetics for either step of diphenhydramine synthesis have not been explored in detail. In this work, for the first step, a methodology has been devised to obtain kinetics from the heterogeneous halogenation of benzhydrol with hydrochloric acid in a batch reactor equipped with in-situ Raman probe and further verified with ex-situ low-field NMR spectroscopy. For the second step, the kinetics of etherification have been explored using a microfluidic flow reactor and at-line NMR spectroscopy in a variety of solvents. Arrhenius and Eyring parameters are determined for Step 2. We find that the reaction performance is well correlated with the acceptor number of the solvent indicating that the Lewis acidity of the solvent plays a significant role in the overall performance

Two-dimensional spectrum characteristics and oil movability study of the shale oil reservoir

Shale oil is mainly stored in the nano–micro-pores of shale in the form of adsorption or in a free state. Among them, only free-state oil is the main contributor to shale oil production under natural elastic energy. Therefore, it is crucial to evaluate the movability of crude oil effectively. In this paper, focusing on the Jurassic shale oil reservoir core in the middle-eastern Sichuan region of China, low-field nuclear magnetic resonance (NMR) technology is used to analyze the basic characteristics of shale oil core samples. Experiments on the low-field NMR one-dimensional and two-dimensional spectrum characteristics of the original core, heat-treated core, and thermogravimetric-treated shale core are carried out. The effects of the TG-MS method, T2 method, and the volatilization of light oil components on the movability of shale oil reservoirs are analyzed, and the movability characteristics of shale oil reservoirs in the middle-eastern Sichuan region are preliminarily clarified. The results show that under thermal treatment, the distribution range of the two-dimensional spectrum of the core oil occurrence area is significantly reduced, and the T1 and T2 distribution ranges are reduced by 10.9% and 60.7%, respectively. According to the TG-MS method, the mobile oil, bound oil, and adsorbed oil account for 74.7%, 8.1%, and 17.2%, respectively. The quantitative calculation of movable oil saturation by NMR combined with heat treatment is 65.6%, which is lower than that calculated using the thermogravimetric method. In order to calculate the movability more accurately, the scale effect between different samples should be considered. This study could provide a theoretical basis for the subsequent shale oil development program.

Beyond the permeability barriers: Unveiling the potential of dual-crosslinking hydrogel nanofiltration membranes for high-performance molecular/ion sieving

Membrane separation technology has shown great potential in resource recovery, energy utilization, and environmental protection, attracting extensive attention for the various practical applications. The alginate-based hydrogel membrane, derived from natural biomass, possesses sustainability and anti-fouling properties, effectively reducing the burden of waste membrane disposal. However, the limitations of alginate hydrogel include its high swelling ability, low permeability, and poor mechanical properties. In this study, we propose a straightforward method to fabricate orderliness hydrogels by employing lanthanide ion via dual cross-linking with CaAlg, resulting in the formation of lanthanum calcium alginate (La-CaAlg) hydrogel membrane. The La-CaAlg membrane exhibits superior mechanical performance and anti-swelling properties compared to LaAlg and CaAlg membranes. Additionally, through small-angle scattering and low-field nuclear magnetic resonance studies on the membrane's spatial orientation, and pore size distribution, we gained the comparable results into its internal structure for the design insight. Notably, the La-CaAlg membrane demonstrates outstanding performance in dye/salt separation, showcasing high selectivity and permeability. We propose the strategy that enhances the orderliness and durability of the alginate hydrogel membrane, providing the separation design insight to overcome the limitations associated with the permeability and rejection trade-off.

Bidirectional Solid-State Fermentation of Highland Barley by Edible Fungi to Improve Its Functional Components, Antioxidant Activity and Texture Characteristics.

In food industry, the characteristics of food substrate could be improved through its bidirectional solid-state fermentation (BSF) by fungi, because the functional components were produced during BSF. Six edible fungi were selected for BSF to study their effects on highland barley properties, such as functional components, antioxidant activity, and texture characteristics. After BSF, the triterpenes content in Ganoderma lucidum and Ganoderma leucocontextum samples increased by 76.57 and 205.98%, respectively, and the flavonoids content increased by 62.40% (Phellinus igniarius). Protein content in all tests increased significantly, with a maximal increase of 406.11% (P. igniarius). Proportion of indispensable amino acids increased significantly, with the maximum increase of 28.22%. Lysine content increased largest by 437.34% to 3.310mg/g (Flammulina velutipes). For antioxidant activity, ABTS radical scavenging activity showed the maximal improvement, with an increase of 1268.95%. Low-field NMR results indicated a changed water status of highland barley after fermentation, which could result in changes in texture characteristics of highland barley. Texture analysis showed that the hardness and chewiness of the fermented product decreased markedly especially in Ganoderma lucidum sample with a decrease of 77.96% and 58.60%, respectively. The decrease indicated a significant improvement in the taste of highland barley. The results showed that BSF is an effective technology to increase the quality of highland barley and provide a new direction for the production of functional foods.

Fractal evolution model of proton spatial distribution in low water/binder cement-based composites (LW/B-CC) during early-age hydration process

This study establishes the fractal evolution model of proton spatial distribution in low water/binder cement-based composites (LW/B-CC) based on fractal theory and low field nuclear magnetic resonance (LF NMR) technology. The results show that the fractal evolution process of gel water, capillary water and surface water distributions in LW/B-CC presents three stages: the first 4–6 h after the beginning of hydration, 4–6 h to 12 h, and 12 h to long-term stage. In the first and second stages, the fractal dimensions of gel and capillary water increase linearly with hydration time, while the fractal dimension of surface water decreases linearly. The boundary is a sudden change of fractal dimensions after about 4–6 h of hydration. The third stage starts after about 12 h of hydration, at which time the fractal dimensions begin to converge to fixed values. Besides, this study reveals the mathematical relationship between fractal dimension (Df) and particle size distribution modulus (q), which is conducive to achieve the full-cycle regulation of LW/B-CC.

The Effects of Four Different Thawing Methods on Quality Indicators of Amphioctopus neglectus.

Amphioctopus neglectus is a species of octopus that is favored by consumers due to its rich nutrient profile. To investigate the influence of different thawing methods on the quality of octopus meat, we employed four distinct thawing methods: air thawing (AT), hydrostatic thawing (HT), flowing water thawing (FWT), and microwave thawing (MT). We then explored the differences in texture, color, water retention, pH, total volatile basic nitrogen (TVB-N), total sulfhydryl content, Ca2+-ATPase activity, and myofibrillar protein, among other quality indicators in response to these methods, and used a low-field nuclear magnetic resonance analyzer to assess the water migration that occurred during the thawing process. The results revealed that AT had the longest thawing time, leading to oxidation-induced protein denaturation, myofibrillar protein damage, and a significant decrease in water retention. Additionally, when this method was utilized, the content of TVB-N was significantly higher than in the other three groups. HT, to a certain extent, isolated the oxygen in the meat and thus alleviated protein oxidation, allowing higher levels of Ca2+-ATPase activity, sulfhydryl content, and springiness to be maintained. However, HT had a longer duration: 2.95 times that of FWT, resulting in a 9.84% higher cooking loss and a 28.21% higher TVB-N content compared to FWT. MT had the shortest thawing time, yielding the lowest content of TVB-N. However, uneven heating and in some cases overcooking occurred, severely damaging the protein structure, with a concurrent increase in thawing loss, W value, hardness, and shear force. Meanwhile, FWT improved the L*, W* and b* values of octopus meat, enhancing its color and water retention. The myofibrillar protein (MP) concentration was also the highest after FWT, with clearer subunit bands in SDS-PAGE electrophoresis, indicating that less degradation occurred and allowing greater springiness, increased Ca2+-ATPase activity, and a higher sulfhydryl content to be maintained. This suggests that FWT has an inhibitory effect on oxidation, alleviating protein oxidation degradation and preserving the quality of the meat. In conclusion, FWT outperformed the other three thawing methods, effectively minimizing adverse changes during thawing and successfully maintaining the quality of octopus meat.

Pressure-assisted vacuum filtration fabrication of polymer membranes with enhanced selectivity for the separation of an ethanol/carbon dioxide mixture

The membrane performance and effectiveness of fabrication are significant factors that determine the industrialization of membranes. In this study, a pressure-assisted vacuum filtration method was proposed to fabricate a sub-100 nm thin composite membrane using a homemade polyamide for the separation of an ethanol/carbon dioxide (CO2) mixture. Because during bioethanol fermentation, a large amount of CO2 can be produced, forming fermentation tail gas with vaporized ethanol, which should be separated to recover ethanol and reduce greenhouse CO2 emissions. The fabrication conditions, including the size of the polymer coil and feed pressure, were investigated in detail. Characterization using a dynamic laser scatterometer and low-field nuclear magnetic resonance (NMR) was conducted to reveal the membrane properties. The membrane performance obtained by the pressure-assisted vacuum filtration method was compared with that obtained by the solution casting method, which was demonstrated to be 40 % higher. Meanwhile, when a smaller pore size of the substrate was used, a 56 nm thick composite membrane was obtained with an ethanol/CO2 selectivity of 18 and an ethanol permeance of approximately 35000 GPU (1960 Barrer). Finally, the effects of the operating parameters, such as the feed concentration and stability, on the membrane performance were investigated. This study provides a valuable reference for the fabrication of ultrathin polymer membranes.

Effect of guar gum, gelatin, and pectin on moisture changes in freeze-dried restructured strawberry blocks

This study aimed to investigate the effects of edible gum addition on moisture changes in freeze-dried restructured strawberry blocks (FRSB), which involved five groups: the control, 1.2% guar gum, 1.2% gelatin, 1.2% pectin, and the composite group with 0.5% guar gum, 0.5% gelatin, and 0.45% pectin. The results indicated that the drying rates of the five groups of FRSB presented similar early acceleration and later deceleration trends. Moisture content in FRSB was linearly predicted by peak area of low field nuclear magnetic resonance with R2 higher than 0.90 for all the five groups. The FRSB samples in the gelatin and composition groups formed a denser porous structure and had a lower hygroscopicity after four days of storage. This study provides a theoretical basis for controlling the processing of FRSB.

Porous Ceramic Metal-Based Flow Battery Composite Membrane.

In metal-based flow battery, membranes significantly impact energy conversion efficiency and security. Unfortunately, damages to the membrane occur due to gradual accumulation of metal dendrites, causing short circuits and shortening cycle life. Herein, we developed a rigid hierarchical porous ceramic flow battery composite membrane with a sub-10-nm-thick polyelectrolyte coating to achieve high ion selectivity and conductivity, to restrain dendrite, and to realize long cycle life and high areal capacity. An aqueous zinc-iron flow battery prepared using this membrane achieved an outstanding energy efficiency of >80%, exhibiting excellent long-term stability (over 1000 h) and extremely high areal capacity (260 mAh cm-2). Low-field nuclear magnetic resonance (NMR) spectroscopy, small-angle X-ray scattering, in situ infrared spectroscopy, solid-state NMR analysis, and nano-computed tomography revealed that the rigid hierarchical pore structures and numerous hydrogen bonding networks in the membrane contributed to the stable operation and superior battery performance. This study contributes to the development of next-generation metal-based flow battery membranes for energy and power generation.

Pore Water Conversion Characteristics during Methane Hydrate Formation: Insights from Low-Field Nuclear Magnetic Resonance (NMR) Measurements

Understanding the conversion characteristics of pore water is crucial for investigating the mechanism of hydrate accumulation; however, research in this area remains limited. This study conducted methane hydrate formation experiments in unconsolidated sands using an in-house low-field nuclear magnetic resonance (NMR) system. It focused on pore water conversion characteristics and influencing factors such as initial water saturation and sand particle sizes. Results show that methane hydrate formation enhances the homogeneity of the effective pore structure within sand samples. The conversion rate of pore water is significantly influenced by differences in heat and mass transfer capacity, decreasing as initial water saturation and sand size increase. Pore water cannot be fully converted into hydrates in unconsolidated sands. The final conversion ratio of pore water in water-poor sand samples nears 97%, while in water-rich sand samples, it is only 65.80%. Sand particle size variation has a negligible impact on the final conversion ratio of pore water, with ratios exceeding 94% across different particle sizes, differing by less than 3%.

Influence of plasma breakdown on pores and fractures in bituminous coal: A new characterization method of breakdown energy

Plasma technology has a potential application prospect in the field of coal seam permeability enhancement. However, the relationship between plasma breakdown energy and the improvement effect of coal pores and fractures is lack of in-depth research. This study proposed a novel method for characterizing the plasma breakdown energy, and three testing techniques, namely, particle size distribution, mercury intrusion porosimetry (MIP) and low-field nuclear magnetic resonance (NMR), were utilized to examine the pore and fracture distribution of coal samples obtained from Jiulong Mine under varying breakdown energy conditions. The influence between breakdown energy and pores and fractures development is revealed. The results show that: (1) The degree of coal sample fragmentation increases with the increase of plasma breakdown energy. (2) Different breakdown energy induced the development of different pore distribution patterns. At lower breakdown energy, an increase in the volume of macropores dominates. As the breakdown energy increases, there is a rapid increase in the volume of mesopores, a slight increase in minipores, and the least increase in micropores, indicating that plasma treatment primarily improves pores with diameters greater than 100 nm. The test results of the three techniques were mutually verified. (3) Compared with capacitance energy and voltage, the effective breakdown energy obtained by the integral method has a more significant linear relationship with the particle size distribution, total pore volume, and average pore diameter, indicating that the effective breakdown energy is more suitable for characterizing the crushing effect of plasma. During the plasma breakdown process, the expansion stress and thermal stress formed by the effective breakdown energy exceeded the local tensile strength of coal, leading to the generation and development of pores and fractures, which in turn led to the rupture of the coal body. The larger the breakdown energy, the larger the crushing circle formed around the ion channel, the finer the coal is crushed, and the more pore fractures are developed. These nascent pores and fractures provide channels for gas transport, which is extremely favorable for coal mine gas extraction. The research conclusions provide theoretical support for the application of plasma in fracturing and permeability enhancement in coal seams.